Why Is your Carpet Sticky After It's Shampooed? (What You Should Know)

You may have gotten your carpet shampooed, or you have done it yourself and you’re wondering why the finishing product is the carpet being sticky. In this blog post, we’re going to go over why your carpet may feel sticky afterward and what you can do about it.

Answer To The Question Why Is Your Carpet Sticky After It’s Shampooed:

The first thing you should know is that this is not uncommon. It’s quite common for carpets to feel sticky after they have been shampooed. The reason why this happens is because of the chemicals that are used in the shampoo. These chemicals can leave behind a residue on the carpet that will make it feel sticky.

This is a sign that you didn’t rinse the carpet correctly, and that you had too much shampoo residue left behind.

Why Is a Sticky Finish Bad For Your Carpet?

A sticky finish is terrible for your carpet. This is because it allows the carpet fibers to pick up more dirt than usual. Your initial goal was to get rid of that dirt and other debris that was stuck in your carpet, but now it’s just going to be worse. The dirt will be able to adhere to the carpet much easier because of the sticky finish.

What To Do If Your Carpet Feels Sticky After Shampooing?

There are many things you can do in this situation.

Call The Company Back

The first thing you should do is call the company that shampooed your carpets and let them know about the problem. They may be able to offer a solution or send someone out to fix the issue. They should at least, being they came for the sole purpose of reviving your carpets.

Re-Rinse The Area

One thing you can do is fill a carpet shampooer with just water and go over the sticky areas again. This will help to remove any of the leftover shampoo residues that are causing the problem.

Avoid Walking On The Carpet With Shoes Until The It’s Solved

Walking on the carpet with shoes will just make the problem worse. The dirt and debris from your shoes will get stuck in the sticky finish and make it even harder to clean.

That’s why it’s important for you, and everyone else in your household, to avoid walking in the sticky areas with shoes until it’s been resolved.

Use A Vacuum To Remove The Sticky Finish

If the previous two solutions don’t work, then you can try using a vacuum to remove the sticky finish. This may take some time and you may have to go over the area multiple times. But it’s worth a shot if nothing else is working.

If you have a vacuum with a brush attachment, that will work best. Start by vacuuming in a small area to see if it’s working before moving on to larger areas.

How To Avoid This In The Future

Rinse Thoroughly

The best way to avoid this issue is to make sure you rinse the carpet thoroughly after shampooing it. You should also use as little shampoo as possible. You must follow the instructions on the shampoo bottle so that you don’t use too much.

Make Sure You Use a Quality Carpet Shampoo

One of the biggest reasons your carpet may feel sticky after shampooing is because you’re using a low-quality shampoo. Low-quality shampoo tends to be much harder to get out of the rug, and it also doesn’t work as well. This leaves more residue behind and makes it more difficult to rinse.

Using a quality carpet shampoo will help to avoid this issue. You should also make sure you’re using the correct amount of shampoo per the instructions on the bottle.

Steps To Properly Shampoo Your Carpet

There are a few steps you should follow when shampooing your carpet to avoid this issue.

1. Vacuum the area you’ll be shampooing beforehand. This will help to remove any dirt or debris that could get stuck in the shampoo.
2. Follow the instructions on the shampoo bottle. This includes using the correct amount of shampoo and adding the correct amount of water.
3. Rinse the area thoroughly after shampooing. Use a carpet cleaner or just clean water to remove all the soap suds.
4. Allow the area to dry completely before walking on it or using it again.

Tips to Do It Correctly

Don’t use too much soap

This is one of the most important tips. If you use too much soap, it will be very difficult to rinse it all out. This will leave a sticky residue behind that will attract dirt and debris.

Don’t Place Furniture Back Until It’s Completely Dry

If you place furniture back on the carpet while it’s still wet, it can cause rust on metal legs or leave marks on the carpet. Wetness could also ruin wood furniture.

Get a Professional Carpet Cleaner

If you’re not comfortable shampooing your carpet yourself, or if you’ve tried and failed, then you may want to hire a professional carpet cleaner. They have the experience and knowledge to do it correctly so that you don’t have to worry about it.

Conclusion

As you can see, there are many reasons why your carpet may feel sticky after shampooing. The most important thing you can do is to make sure you rinse the carpet thoroughly. You should also be sure to use a quality carpet shampoo so that you don’t have as much residue left behind. Following these tips will help to keep your carpet feeling soft and looking great.

If you found this blog post helpful, please share it with your friends! Thanks for reading!

Take a look at our other most recent blog posts below:

Why Is your Carpet Sticky After It’s Shampooed? (What You Should Know)