If you are laying carpet tiles in a new space, the chances are high that you will need to trim them at some point. You might start wondering, can you cut carpet tiles with scissors?
You can’t cut carpet tiles with standard scissors, as the tiles are so thick that the blades will not easily slice through them. You will get wonky edges as the blades struggle to close on the fabric. However, if you have very heavy duty scissors, they may be able to go through the carpet tiles.
In this article, we’ll walk you through the best and easiest ways to cut carpet tiles. This should make this part of the job a breeze and ensure that you get straight edges each time. Your carpet job will look a lot neater if you can achieve this!
How Do You Cut Carpet Tiles With Scissors?
Cutting carpet tiles is a very common part of laying them, as you will rarely be laying them in a room where they fit perfectly and don’t need to be trimmed down.
You will generally start in the center of the room and work your way outward, which may mean that you need to cut the tiles on all sides. This can be a nuisance, but knowing how to do it will make it much faster.
The best way to cut carpet tiles with scissors is as follows:
- Measure and mark where the tile needs to be cut so that you can make an accurate cut that will take off the exact amount you need to remove. Use a ruler to draw a straight line along the back of the tile, where you will cut. Chalk is a good medium to draw with because you can rub it off again.
- Line a ruler or another straight edge up with the carpet tile so that you don’t veer off while cutting it.
- Cut along the edge of the tile with your scissors, making sure you get a straight line. If you don’t get a straight line, the tile will not line up properly with the wall, and you’ll either get bumps or gaps.
- Set the tile in place and check that you are happy with the alignment, or cut more off if necessary.
This should give you a smooth, even edge to your carpet tile, but unless your scissors are very sharp, it can be challenging to get a neat line that you are happy with. Work slowly, and stop if you discover that the cutting line is veering off to one side.
Is It Better To Use A Knife?
If you have a knife available, you will probably find that it is a much better tool for cutting straight lines. This is because scissors often push the material around as the blades attempt to close, which makes it challenging to get a straight edge. If you use a knife, you should find it significantly easier.
The blade needs to be very sharp, and you should make sure that you can press the knife down firmly to make one clean cut. You do not want to be sawing or hacking at the tile, because this will leave ragged edges that will show when you put the tile on the floor.
If you want to use a knife to cut the carpet tile, you should:
- Measure and mark the tile so that you know exactly where to cut. Draw a straight line across the tile.
- Place the tile on a hard surface, preferably of some scrap material. Your knife may scratch this surface as you cut, so make sure this won’t matter.
- Take your sharp blade and use it to cut along the line you have drawn. You may find that it helps to have a ruler to guide your blade as you cut.
- Cut all the way along the tile until the piece separates. You may need to press against the tile edges to stop them from slipping while you cut.
- Check that the tile fits well against your edge and remove more of the carpet if necessary. Once you are happy, continue cutting any other tiles that you need to shorten.
If you don’t have a knife that is suitable, sharp scissors will work, but knives generally create a better, straighter, and neater edge. It is also far easier to cut an “L” shape into the carpet tile if you need to, whereas scissors can be hard to make right angled cuts with.
FAQs
Q: Do carpet tiles need to be glued down?
A: If your carpet tiles do not have adhesive on them, you will need to either add an adhesive, or use a double-sided tape to apply them to the floor. Wherever you have cut the tiles, use tape, because the loose edges are the most likely to flap up when they are walked on. If you have cut an “L” shape, use tape on both edges.
Adhesive tiles will not usually need tape adding, even if you have cut them.
Q: What tool is used to cut carpet?
A: Most people use a sharp utility knife when they cut carpet, because this is the best way to get neat, clean edges. Scissors may work, but they need to be very sharp if they are to make clean cuts. Test them on a scrap piece of carpet first if possible.
Q: How do you cut carpet without fraying?
A: Carpet tiles probably won’t fray, but if you are concerned about fraying, you can seal the edges using heat or a carpet binder tape. Either of these methods will prevent fraying and will also give you a neater edge.
Conclusion
You can cut carpet tiles with scissors if they are sharp enough to cut through the fibers without bending the tile out of shape while you are cutting. However, a sharp knife is usually a better option because the tile will not be pushed out of line by the blades attempting to close on it.
Please share this post with whoever you can! Take a look at our other related posts below: